NAMM 2015: Sennheiser Launch Wireless D1 Mic
Sennheiser have launched a new wireless mic at NAMM 2015. Read on for more info… Press Release Bands can now just forget about frequency setting, matching transmitters and receivers, and getting the gain right – evolution wireless D1 offers true ease of use by doing all these time-consuming and sometimes error-prone chores for them. […]
Sennheiser have launched a new wireless mic at NAMM 2015. Read on for more info…
Bands can now just forget about frequency setting, matching transmitters and receivers, and getting the gain right – evolution wireless D1 offers true ease of use by doing all these time-consuming and sometimes error-prone chores for them.
“Basically, all that is needed is to switch the system on”, said Martin Fischer. “The rest will happen automatically. In no time at all, you’re all set to start jamming – with all the levels right, and a stable wireless link.”
D1 operates in the 2,400 to 2,483.5 MHz range, which is license-free worldwide so there is no need to register the system or pay for the use of bandwidth. Region-specific particularities are catered for in the respective country variants.
To allow co-existence with Wi-Fi, Bluetooth and other 2.4 GHz systems, the D1 receiver continually scans the RF environment, and will inaudibly and seamlessly hop to another frequency if it detects any interference. “ew D1 continually checks the entire 2.4 GHz band in your surroundings to guarantee you optimum performance,” added Fischer.
Two channels are always available: besides the actual audio transmission channel, the system runs a redundant back-up channel, thus providing frequency and time diversity. Transmission reliability is further increased by fast-switching antenna diversity. Summing up, Fischer said, “ew D1 uses triple diversity to protect the wireless link between radio microphone and receiver.”
evolution wireless D1 employs the industry-leading aptX Live® codec that ensures excellent audio quality and wide dynamics for vocals, speech and instruments over the entire audio frequency range. Overall latency is a low 3.9 milliseconds, which is ideal if wireless monitors are to be used. To ensure optimum levels, ew D1 automatically sets the correct microphone sensitivity.
Via the ew D1 menu control, bands have a range of audio effects at their disposal. These include a 7-band graphic equalizer, low-cut filter, automatic gain control and de-esser. The D1 vocal systems come with dynamic evolution microphone heads but can naturally also be combined with the condenser capsules from the acclaimed series, which are available as accessories.
Channel coordination and adaptive transmission power
ew D1 systems coordinate themselves fully automatically. For multiple systems, receivers will synchronize themselves to accommodate up to 15 channels in an ideal RF environment.
Where local frequency regulations allow, for example in the USA and Canada, Sennheiser has fitted its evolution wireless D1 systems with adaptive transmission power, with up to 100 milliwatts of power ensuring an extra-reliable link and extended range.
For this, the receiver continuously informs the transmitter about how much RF output power is actually needed for a stable signal.
The transmitter adapts accordingly and transmits at the requested power. “This feature not only increases the range if, for example, the singer moves further away from the receiver but it also saves battery power in those instances where the transmitter is very close to the receiver,” said Martin Fischer.
Powering and control options
D1 transmitters can be powered by either standard batteries or rechargeable “accupacks” that are available as accessories. These rechargeable lithium-ion packs recharge via USB or a docking charger and offer the additional advantage that the remaining battery life is indicated on the transmitter and receiver. Where required, the ew D1 system can be controlled by Apple® or Android® devices using a dedicated app.
evolution wireless D1 comes in complete, ready-to-use systems or can be tailor-made by combining individual components, which is especially attractive for vocal systems. Besides the vocal and instrument systems, the D1 series comprises headmic and lavalier systems. Available in your local music stores from March 2015.
Get the latest news, reviews and tutorials to your inbox.Subscribe