Review: Samson Q9U

Samson responds to the ever-increasing demand for podcast and voice-over recording gear with the Q9U, a large-diaphragm dynamic broadcast mic with full digital credentials.

Samson Q9U

Samson Q9U

When you purchase through affiliate links on, you may contribute to our site through commissions. Learn more.

Review Overview

Our rating


Our verdict

Professional sound quality for speech and singing
Rock-solid build quality
USB interface with headphone output
Easily accessible mute button (digital only)
Analogue XLR output for non-USB use

Transmission vibration rejection could be better

The dynamic broadcast mic market is dominated by some iconic models from which the Q9U borrows some analogue traits, and tops it off with a USB interface at a very competitive price.

Price $199/£219
Contact Samson

When many of us think of broadcast microphones, two models come to mind, the Shure SM7B and the Electro-Voice RE20. The Samson Q9U gives a tip of the hat to both in its design while adding a 24-bit, 96kHz capable USB interface without losing the analogue XLR output.

The rear of the mic houses the USB-C socket (USB-C and USB-A cables included), headphone output, low cut filter and mid presence boost switches, with a (digital) mute switch on the top. This near 1kg mic is supported by a robust metal yoke which terminates in a 5/8” stand thread; a 3/8” adapter is not included. The foam windscreen performs well in reducing plosives without eating the high-end and may only need removing for indirect or distant sources.

Broadcast ready

Samson Q9U side aspect

Dynamic mics have found favour in broadcast studios due to their vocally sympathetic sensitivity range, off-axis rejection and reliable simplicity. The Q9U fits this broadcast bill in several ways. The voicing is well balanced, allowing proximity to be used without the low-end dominating. The low-mid richness that defines quality voice recordings is all there, accompanied by a smooth sibilant response and an appropriate insensitivity to plosives.

The low-cut and mid-presence boost switches provide all the initial adjustment necessary for the majority of uses. It may be no coincidence that these are the two controls found on the Shure SM7B, but they differ in that the Q9U mid-boost could easily remain switched in – it lifts what I would ordinarily EQ later, whereas I rarely use the SM7B version.

The low-cut is not only used to tame external hums/rumbles and point-blank vocalists, but it provides a way to mitigate against stand borne noises, and here we find the Q9U’s Achilles heel. The vibration transmission is audible when a stand is knocked, and the frequency range over which it occurs reaches beyond the knee of the low-cut, behaving more like a condenser mic than a dynamic.

Articulation and rejection

Samson Q9U rear view
On the rear, the Q9U sports an XLR out, 3.5mm headphone out, USB-C output and switches for low cut and mid-presence boost

The mid and high-frequency response ably keeps sibilance un-hyped without sacrificing vocal articulation and clarity. There is a softness that comes with dynamics versus their shiny condenser counterparts, so don’t expect airy highs; that’s not what this type of mic is about. The other part of the dynamic cardioid mic character on display here is the high degree of off-axis rejection.

When coupled with a mic preamp, the output level is similar to the SM7B; it can be a touch noisy with quiet sources. The signal-to-noise ratio is lower when recording via USB, plus you get to use the mute button on the top of the mic, which is invaluable when using the headphone (and line) output.


Samson has rolled a lot up into the Q9U: broadcast quality sound, two EQ switches, USB interface with headphone output and mute switch, and all in a rock-solid build. Like the RE20 and SM7B, this mic is at home with sung and rapped vocals, so don’t overlook it just because you don’t podcast or narrate YouTube videos. At around £200/$200 in the shops, it really is hard to ignore.

Key Features

  • Dynamic element with humbucking coil
  • Frequency response: 50Hz – 20kHz
  • Cardioid polar pattern
  • Impedance: 250Ω
  • Connections: XLR (analogue out), USB-C (digital out), 3.5mm (16Ω headphone out)
  • Digital output: 24-bit, up to 96kHz
  • Controls: mute, low cut, mid boost
  • Package includes: 2m USB-C to USB-C, 2m USB-C to USB-A, foam windscreen
  • Body constructed from zinc alloy with steel grille
  • Weight: 970g / 2.13lbs
  • Dimensions: 178.5 mm x 60mm (diameter) / 7″ x 2.4″ (diameter)

Get the latest news, reviews and tutorials to your inbox.

Join Our Mailing List & Get Exclusive DealsSign Up Now

The world’s leading media brand at the intersection of music and technology.

© 2024 MusicTech is part of NME Networks.