NAMM 2016: Radial Engineering New Product Announcements
Radial Engineering have been busy all preparation for this years NAMM show, here are their new product announcements. Official info below: Shotgun 2×4 Guitar Signal Distro Combination signal driver and isolator lets you feed 4 guitar amps in either mono or stereo. Features two inputs with switching jack on input B to auto configure for […]

Radial Engineering have been busy all preparation for this years NAMM show, here are their new product announcements.
Official info below:
Shotgun 2×4 Guitar Signal Distro
Combination signal driver and isolator lets you feed 4 guitar amps in either mono or stereo. Features two inputs with switching jack on input B to auto configure for stereo use. Transformer isolated outputs to eliminate ground loops, will drive Hi-Z guitar cables 15 meters (50ft).
MAP: $169.99 USD
BT-Pro Bluetooth® Direct Box
Automatically pairs with Bluetooth® transmissions from laptops, iPhones and tablets to enable wireless connection to the PA system via balanced outputs. Unique top-side antennae reduces interference allowing reception distances of 15 meters (50′).
MAP: $229.99 USD
JDX Direct Drive Amp Emulator and DI box
Combination guitar amp emulator and direct box that lets you perform live or record without an amplifier. Simply connect your guitar to your pedals and play. The compact Direct-Drive features three cabinet styles with ¼” out for monitors and XLR out for the PA system.
MAP: $199.99 USD
mPress and Exo-Pod Modular Press Box
Modular broadcast press box with two mic inputs, 48V phantom and overload limiter and eight built-in XLR outputs for mic level recorders. These can be switched for extra-power to feed Exo-Pod external distro boxes for over 100 simultaneous feeds. Fully isolated to eliminate noise.
MAP: $1,099.99 and $279.99 USD
DiNET Network direct box with Dante
A ‘world first’! Dante™ enabled direct boxes: The DiNET DAN-RX includes a 24bit/96kHZ digital to analog endpoint that allows the user to output audio from a Dante™ network to stereo systems. The DiNET DAN-TX allows the user to connect instruments or line level sources directly to networked audio systems using the Dante™ protocol.
MAP: TBD
Jensen Twin-Servo 500 Series Preamplifier
A modern recreation of a classic – made to fit the 500 series format, the Jensen Twin-Servo completely eliminates capacitors and combines two 990 op-amps with two Jensen transformers to produce the widest bandwidth and fattest bass ever.
MAP: $999.99 USD
McBoost Microphone Signal Booster
Phantom powered Class-A FET elevates the output of a microphone by up to 15dB for improved signal to noise and clarity when using standard mic preamps. Ideally suited for classic low-output dynamics such as the Shure SM7™ or EV RE20™ or older ribbons by RCA™.
MAP: $199.99 USD
Catapult 4-channel Cat-5 Audio Snake
A four channel audio snake that lets you send analog and AES digital audio signals over standard cat-5 shielded twisted pair cable. This enables system contractors to take advantage of pre-wired networks to connect one room to another and allows stage techs to take advantage of the relatively low cost of this abundantly available cable for return snakes or for transporting channels of balanced audio across a large stage.
MAP: $139.99 – $229.99 USD